Xblue-networks X16 User Manual download pdf (Page 33)

Issue 2 - 33 -

Features

Flash

The flash command (

Feature

+ ) is used to invoke features on telephone lines

such as call waiting and three-way calling. The Flash command may be

programmed on one of the programmable buttons.

Flash Timer

This adjustable timer is used to compensate for telephone network variations.

Forward

Calls can be forwarded to one of three destinations; voice mail, external number

or trunk to trunk. Calls transferred to an extension that is forwarded, will only

forward after the “Waiting Time ” has expired. At default the Waiting Time is set

to 10 seconds. Use the “Programming” area to program this parameter.

Voice mail

– When an extension is forwarded to voice mail, the center navigation

button will illuminate (lit solid); no other visual indication will be given. After the

expiration of the Waiting Time, the call will be diverted (redirected) to the

extension‟s voice mail greeting.

TRK2TRK

– When an extension is forwarded to an external number the system

will send a command to the telephone network line, known as a “Flash”, which

begins the transfer. The telephone system will then dial the preprogrammed

digits, pause until the call is established, and then hang up, releasing the call

from the system. TRK2TRK FWD will appear in the display, use the right

navigation button to clear this from the display.

Note:

This feature may require a special service from the telephone company central office

called, “Three-way calling with call disconnect”. Please consult with your telephone

company for information regarding this feature. This type of forwarding may result in a

usage and toll charge for each forwarded call

. Any and all toll charges are the sole

responsibility of the user of the installed equipment; XBLUE offers no warranty or will

assume any responsibility for any toll charges.

External

– External Call forwarding uses two telephone system lines.

1) This feature occupies two CO Lines. Therefore, if a second CO Line

is not available, the call will not forward. Also, a slight volume

decrease is normal.

2) If an ancillary device (single line before the system) is on a CO Line,

and the system does not detect that line as being busy, the system

will forward the call, and dial over the call.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

Comments to this Manuals

No comments

Xblue-networks X16 User Manual Page 33

Comments to this Manuals

Related products and manuals for Phones Xblue-networks X16