Xblue-networks X16 User Manual download pdf (Page 21)

1645-00 X-16 CORDLESS TELEPHONE MODULE

Buzzer Cadence

Indication

Description (time in seconds)

Intercom Ring

0.5 off, 0.5 on

Telephone Line Synchronize with the first ringing telephone Line’s cadence

Transfer/Recall Ring 1.0 on, 1.0 off

Common Symptoms

Indication

Description

Will not power up

when it is plugged in

Confirm that the plugs are in the correct port of the Cordless

Telephone Module.

Unplug a working X16 Digital Telephone and plug it into the

port labeled “EKT”.

Plug the working X16 Digital Telephone into the cable that

was not working for the Cordless Telephone Module.

I cannot find my

extension number

Using your cordless, corded or conference room telephone

dial “0” (Zero) and your extension number will be displayed

on the X16 Digital Telephone‘s Display.

The Cordless, corded

or Conference Room

Telephone is not

working

Confirm that the plugs are in the correct port of the Cordless

Telephone Module.

Unplug one of the lines from the X16 server port labeled “CO

Line” and plug it directly into your cordless, corded or

conference room telephone.

I do not get caller ID Make sure that the telephone is programmed to ring.

Call Forward

Calls are not forwarding to a remote telephone number:

Double check that the number entered correctly.

External Forward - Make sure that there is an idle telephone

line to access the outbound call.

TRK2TRK – Make sure that your telephone line provider offers

this service. This feature usually requires a subscription from

your telephone line provider.

1 2 ... 16 17 18 19 20 21 22 23

No comments

Xblue-networks X16 User Manual Page 21