Xblue-networks X16 User Manual download pdf

Telephone Company

Telephone Lines

Line 1

Line 2

Line 3

301 302 303

Initialization

X16 System Components

Speakerphone Button

Programmable

Buttons

Telephone

Line Buttons

Navigation

Keys

Backlit Display

Integrated Headset

Port

Plug the system in to power it up. Once powered up, the system’s blue LED

will blink rapidly, 4 impulses per second (IPS). After 5 seconds, it will begin

blinking at the normal operational rate of 1 IPS. To ensure that the X16 system

is initialized properly, switch the “INIT” switch back and forth three times

within three seconds. When the LED returns to 1 IPS, the system will be fully

operational.

Function

Label on X16

Line 1 Fail over Line 1

Telephone Line 1 1/2

Telephone Line 2 2

Telephone Line 3 3/4

Telephone Line 4 4

Telephone Line 5 5

Telephone Line 6 6

{

Your installation may look something

like this.

In this example, The telephone

company’s telephone lines are

connected on the right side and

telephone line 1 is looped to all of the

extensions, 1, 2, 3 and 4, which are

connected on the left side.

When ordering your telephone lines, it

is a good idea to ask for the lines to be

delivered on a “Surface Mount Jack”

or with existing installations you can

use a “Testar_2 Connecter”, which will

make the installation of the X16 much

easier.

Telephone professionals use a

standard color code when connecting

telephones and telephone lines. The

white/blue pair, indicated by “Ext 1, 2,

3 and 4, is normally connected to the

ofce’s telephone jack.

One way to recongure this type of

installation is to remove each of the

extension (Ext) cables and connect

the white/blue cable to the red wire

and the blue/white (or solid blue) cable

to the green wire. Another way, is to

connect a “Testar_2 Connecter” (see

Ext 4), which simply slips over the

pins.

Now connect the supplied line cords

between the surface mount jack or

Testart_2 connecter and the ports in

the X16 system. You can connect

them directly, 1 to each port, or using

the supplied splitter.

Digital Extensions

13~16 9~12 5~8 1~4

Ext 1

Ext 2

Ext 3

The X16 system can be placed on a table or mounted on a wall. It should be located

close to where the telephone lines come into the building and plugged into a 110

electrical power outlet. Only the X16 system needs to be plugged in, all of the X16

telephones and the Cordless Telephone Module are powered by the system.

Telephone lines are usually found on the center pair (Red/Green) of the telephone jack

(RJ11). Sometimes a second line will be connected

to the outer pair (Black/Yellow) (RJ14). The

system is designed to accommodate both types

of installations. When using only the center pair,

connect 1 telephone line to each of the 4 ports in the

system. When using both the center and outer pairs,

use only ports labeled 1/2 and 3/4 to connect all 4

telephone lines.

Your existing cabling will determine how the

telephone lines will be connected to the system.

Note: The port labeled “Line1” is not used for a telephone company telephone line. It is

designed to give you access to the telephone company line 1, which is plugged into the

Central Ofce Port labeled 1/2. This is useful during a Power Failure or anytime you want

to access line 1 from a cordless telephone.

4 2

1/2

3/4

Fail-over Port

to Line 1

Central Ofce Ports

Central Ofce

Ports

An example of

two lines per port

Line 1

Line 2

Line 4

Line 3

An example of

one line per port

Line 1

Line 2

Line 3

Line 4

The X16 comes equipped with four (4) Telephone Company Lines, which are labeled

“Central Ofce”. They are also labeled as 1/2, 2, 3/4, and 4. By adding a 1630-00 2-Port

Expansion Telephone Line Card the system it can be equipped with two additional

Telephone Lines, labeled 5 and 6 for a total of six (6) Telephone Company Lines.

Many helpful instruction videos are available on our website,

please visit www.xblue.com or call 866-925-8312

Many helpful instruction videos are available on our website,

please visit www.xblue.com or call 866-925-8312

Many helpful instruction videos are available on our website,

please visit www.xblue.com or call 866-925-8312

X16 Telephone

Cordless Telephone

Module

X16 Server

4 Line Splitter

XB-1698-XB

Telephone Line Cords

Component Quantities may vary

X16 Quick Start

Guide

X16 Telephone Highlights

1 2

Summary of Contents

Page 1 - X16 System Components

Telephone Company Telephone LinesLine 1Line 2Line 3301 302 303InitializationX16 System ComponentsSpeakerphone ButtonProgrammable ButtonsTelephone Line

Page 2 - Registering X16 Telephones

Loop wiring, which is similar to the wiring found in most homes should be sufcient to run this system. However, older homes may need to updated wirin